Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$15.00 - $34.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually.
- For use with removable valve core Presta tubes
- Knurled end to keep pump from slipping
- 3mm hex broach in the barrel to guarantee a perfect seal when tightened
- Integrated air seal
$4.00 - $17.00
Whisky Parts Co. Tubeless Rim Tape.
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes.
- Available in a number of lengths and colors to perfectly fit your rims and your sense of style.
- Includes two valves
$5.95 - $23.95
- Shim adds support to Presta stem used in a Schrader rim
$10.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$15.00
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight
- Makes tire installation easier and nipple repairs faster than with tape
- Red plugs fit rims with 8mm holes
- Yellow plugs fit rims with 8.5-9.3Mm holes
$4.00 - $42.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$34.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$4.00 - $34.00
The Product that Started a Tubeless Revolution
Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant.
Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
- First choice of riders around the world for tubeless conversion and flat prevention
- Seals punctures up to 1/4-inch (6.5mm) quickly
- Stays liquid 2-7 months for long-lasting protection
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
- Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$23.00 - $42.00
- Tubeless Valve compatible with Stan's ZTR rim
- Sold as a pair
$1.99 - $5.00
Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups.
- Nylon for maximum strength and effectiveness.
- Conforms to rim profile.
$12.99 - $32.97
Prevents thorns and other road debris from puncturing the inner tube and deflating the tire.
- Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners
- Equipped with Soft-Tips that prevent friction flats at the overlapping seam
- Sold in pairs
$11.99
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims.
- Over-sized design provides extra torque when tightening
- CNC-machined from AL-6061 aluminum
$11.99
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$34.99 - $39.99
With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.
Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.
Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used.
Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.
Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike.
Instructions
(1) Remove valve cap, o-ring and lock nut
(2) Insert valve through valve hole in rim
(3) Push the o-ring onto valve stem
(4) Thread the lock nut onto valve stem
(5) hand tighten lock nut until firm
(6) Screw on valve cap
$51.99
Orange Seal Tubeless Conversion Kits contain everything needed to convert a pair of 26-inch, 27.5-inch, or 29-inch mountain wheels to tubeless.
- Proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes
- Everything needed to convert a pair of 26-inch, 27.5-inch, or 29-inch mountain wheels to tubeless (except tubeless-ready tires)
- Contains Rim tape, two 48mm Removable Valve Core valve stems, Removable Valve Core Tool and 8oz of sealant with twist-lock injector
$9.89 - $22.99
Endurance formula lasts twice as long as standard Orange Seal.
- Premium Latex coats the whole casing, from tire bead to tread cap
- Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites
- Developed to add as little weight to a tire as possible
- Made of eco-friendly biodegradable ingredients
$12.99 - $73.69
Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.
$43.99
- SubZero latex tire sealant is specifically designed to work in colder temperatures down to low negative teens
- Contains multiple shapes and sizes of solid particles called nanites which quickly seal holes up to 1/4
- Recommended by numerous tire comp
$17.49 - $24.19
Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect.
- Premium Latex coats the whole casing, from tire bead to tread cap
- Seals punctures up to 1/4" with the use of Nanites
- Developed to add as little weight to a tire as possible
- Made of eco-friendly biodegradable ingredients
- Subzero sealant is developed for use in below-freezing conditions down to -20F
$40.83
- A premium proprietary latex tire sealant formula featuring lightweight biodegradable ingredients; 119.6 grams for 4 ounces
- Contains multiple shapes and sizes of solid particles called nanites which quickly seal holes up to 1/4
- Performs in varying
$8.79 - $21.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$12.99
Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted.
- Proprietary water-based non-hazardous formula developed specifically for use with inner tubes
- Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes
- Works on multiple punctures
- Lasts the life of the inner tube/tire
- Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm
$9.99 - $139.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$5.99
Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).
$29.99 - $34.99
- The same tubeless valves, now with a Tire Insert air flow system
- 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts
- Upgraded to aircraft grade 7075 aluminum valve stem and cap
- 4mm machined Allen Key slot for easy installation/removal
- Valve core removal tool integrated into valve cap
- Includes multiple rubber bases to optimize fit with multiple rim types
$45.99 - $79.99
- Just like the Original version except specially designed for FatBike applications
- 2-ply rubber shield fits between tire and tube to prevent flats
- Fits both 26-inch and 29-inch tires
$19.99
The Lezyne Tubeless Pro Plugs are the most reliable solution for repairing a tubeless bike tire tread at home or in a workshop. These innovative mushroom plugs fill the hole and seal the puncture from the tire, maximizing the life of your tire. You can be sure that your repair will hold up even under the most extreme conditions, so you can keep riding worry-free.
The kit includes three sizes of plugs. With two 3mm, two 3.5mm, and two 4.5mm plugs, you can be sure you'll have the right size to fit your tubeless tire. The kit also includes two abrasive pads and two rubber cement tubes to ensure a secure seal.
- Mushroom plugs that fill the hole and seal the puncture from the inside of the tire
- Includes three plug sizes: 3mm, 3.5mm, and 4.5mm, two abrasive pads, and two rubber cement tubes for a secure seal.
- Most reliable solution for repairing tubeless bike tire tread at home or in a workshop.
$11.99
Dynaplug Megaplugs are constructed from viscoelastic rubber impregnated cord and 6061 aluminum tip.
- Compatible with: Megapill tool, Megaplugger tool, and the Racer tools
- Specially designed to repair large punctures in tubeless bicycle tires
- Approximately three times the thickness of a standard plug (approximately 7/32")
- Pack of 3 replacement plugs
- Made in USA
$6.99
Knurled aluminum body for better grip.
- CNC Machined from 6061 T6 aluminum
Page 1 of 4
Next page