Filter By:
- Cameras (1)
- Parts & Accessories (179)
- Cyclo-Computers (89)
- GPS (66)
- Heart-Rate Monitors (47)
- Phone Accessories (20)
- Power Meters (23)
- Sports Watches (32)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Electronics

$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops.
- Sub-20 gram computer mount
- Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface
- Single Torx T25 fixing bolt

$39.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

$40.49
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes

$40.49
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes

$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes

$34.95
Mount virtually any smartphone to the Thule Handlebar Mount for easy access to GPS data and other apps.
- Conforming side grips securely keep device in place while allowing full access to ports and controls
- Rotates 360° for portrait or landscape viewing
- Rubberized platform prevents slipping
- Compatible with virtually any smartphone, with or without case, up to 90mm/3.5 in. wide.
$37.50
$50.00
25% Off
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location.
- ANGi is a ride tracker, crash detector, and safety beacon.
- Includes a one-year subscription to Specialized Ride Premium app.
- Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates.
- Additional premium features include start ride notifications and ride-time alerts.
- Attaches to Specialized ANGi-ready helmets.
- Approximate six months' battery life on a 2032 coin cell battery.
- Weight: 10 grams w/ battery
- Two-year sensor warranty

$180.00
$200.00
10% Off
Charge your Specialized Turbo battery with this high output, custom Li-ion charger.
• Custom Specialized Li-ion battery charger
• Output: 42V4A
• Compact design while delivering huge power
• With Rosenberger plug and light indication of the charging status

$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.

$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever.
- An elegant, integrated design
- DUB-PWR spindle-based unit measures left-side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User-replaceable lithium AAA battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Wide chainline crankset for bikes with the widest gravel tires

$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap

$39.99
Mount your bike computer directly to your ShockStop Suspension Stem. The ShockStop Computer Mount puts your Garmin, Wahoo, Cateye, Joule, Mio, Magellan, or Polar bike computer in perfect position. Two different mounting positions let you fine-tune the fit of your computer and tuck it out of the wind.
Benefits:
- Conveniently places your computer directly in front of your stem within easy reach
- Two different mounting options let you fine-tune the position of your computer
Details:
- Fits ShockStop Suspension Stem only (Note: using the computer mount with the +30 degree stem will place the computer in a very upright position in line with the stem)
- 2 different mounting positions (upper & lower)
Compatibility:
- Compatible with Garmin Forerunner QR kits
- Compatible with Garmin Edge 1000 in portrait and landscape mode (upper position) and landscape mode only for lower position
- Compatible with Wahoo Element and Polar in the upper position only

$13.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$13.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$54.99
The Protege 9.0 uses the Planet Bike 4-line MacroMonitor display and has digital wireless technology to eliminate messy wires.
- Functions: Current Speed - Speed Comparator - Ride Time - Trip Distance - Dual Odometer (for 2 wheel sizes) - Average Speed - Maximum Speed - Clock - Temperature
- Digital technology results in decreased interference
- Easy-to-adjust sensor that fits bladed spokes up to 4 mm
- 4-Line MacroMonitor LCD displays up to 5 pieces of data at a glance
- Fits 25.0-31.8mm handlebars
- 21" wireless range

$29.99
The Protege Series are great for training, touring, or keeping track of car-free miles.
- Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance
- Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit
- Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button
- Auto start/stop and LCD shut off
- Fits 25.0-31.8mm handlebars
- Weight: 57 grams with bracket and sensor
- Case size: 40mm x 47mm
- Height (w/ bracket): 27 mm

$24.99
The Protege Series are great for training, touring, or keeping track of car-free miles.
- Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance
- Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit
- Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button
- Auto start/stop and LCD shut off
- Fits 25.0-31.8mm handlebars
- Weight: 57 grams with bracket and sensor
- Case size: 40mm x 47mm
- Height (w/ bracket): 27 mm

$38.79
The Protege Series are great for training, touring, or keeping track of car-free miles.
- Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance
- Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit
- Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button
- Auto start/stop and LCD shut off
- Fits 25.0-31.8mm handlebars
- Weight: 57 grams with bracket and sensor
- Case size: 40mm x 47mm
- Height (w/ bracket): 27 mm

$19.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter

$21.50
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- On Stem installation only
- Lightweight and rustproof alloy construction
- Angle adjustable arm design
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove

$69.99
Wires and sensors are a thing of the past! Simply mount the MSW Miniac Go GPS Computer to your handlebars and hit the dusty road. With simple two-button operation and eight functions at your fingertips, you can track distance, speed, trip time, and more while on the bike.
- 1.8-inch monochrome screen with backlight displays four functions at once
- Odometer: trip, total
- Speedometer: current, average, maximum
- Time: current, trip
- Also displays calories burned
- microUSB data cable included for charging
- Up to 10-hour continuous run time
- Water resistant
-311129-1.png)
$39.99
MSW Miniac Wireless computers are designed to be installed quickly and give the essential information riders need to best enjoy their trip.
- Ten functions: clock, current speed, average speed, current vs average speed comparison, maximum speed, trip time, trip distance, total odometer, auto scan, calories
- Two-button design
- CR2032 battery included

$19.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000.
- Camera Adapter mount with GoPro style interface
- Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560)
- Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer.
- Centers camera in out of site position
- Improves video clarity by removing plastic mount shake
- Colors: Anodized Black
- Weight: 14grams
*Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

$64.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max XL combo mount is compatible with all Garmin Cycling Computers
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 63g

$29.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20.
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- Fits 31.8MM Handlebars
- NOT combo compatible
- Weight: 48g
- Anodized Color- Black

$49.99 - $54.99
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models.
Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed.
Attributes (specs):
- CNC Machined 6061 T6 Aluminum
- Compatibility – 31.8mm and 35mm diameter handlebars
- New clamp design is hinged for ease of installation
- Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models.
- Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or

$28.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Page 1 of 12
Next page