Designed with efficient carbohydrates and optimized electrolytes to keep you moving. - Optimized Electrolytes Maintain Fluid Balance - Efficient Carbs Speed Up Hydration - Flavors Sourced From Organic Ingredients Breaking a Sweat For More Than 90 Minutes? Drink Nuun Endurance! When you work out longer than 90 minutes your body needs more than water and electrolytes to keep up. Nuun Endurance is the perfect blend of electrolytes and carbohydrates to keep you hydrated and go longer and stronger all dang day. How To Enjoy: - DROP: Add one scoop to 16 oz of water - STIR: Stir or shake to dissolve - DRINK: Sip to stay hydrated during long workouts

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube, 4 tubes per pack. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. - The Conservation Alliance flavors: Lemon Lime, Fruit Punch, Tri-Berry, and Strawberry Lemonade - People for Bikes flavors: Wild Berry + Caffeine, Fresh Lime + Caffeine, Watermelon, Citrus Fruit

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

- Lower slider replacement parts for E-13 chainguides

- Service parts for E-13 chainguides

- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

Zipp Speed Weaponry Bolt Kits

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

ZIPP Service Course Bar End Plugs, Qty 2.

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

- Plastic bar end plug pair for 22.2mm extensions

Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened

Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal

Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.

- Designed to improve rotational stability by decreasing rotational mass at the valve body - Lightweight aluminum Presta-valve body - Removable valve core - Extenders are available and sold separately

These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.