- MTB or Road - 1.5 x 1855mm - Galvanized

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

- Headset Microspacer - .25mm height each

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- M8 Top Plate Bolt

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Sunlite Cottered Pins

- MTB or Road - 1.5 x 2667mm - Galvanized

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Steel cable noodle with alloy end caps - Includes plastic liner

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- For MTB levers - 7mm x 1mm - Aluminum construction

Shifting cables for Road/Mountain bikes.

- Standard steel replacement

Flat head screws from Wheels Manufacturing.

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Serfas Seat Clamp fits all Serfas' seats with standard rails. It's compatible with 7/8-inch diameter seatposts.

- Replacement link wire for cantilever brakes

The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline

- Sold in pairs. - Allen wrench included.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.

- Chrome allen seat binder bolt

- Fits cantilever brakes - Sold individually

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert