Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

Pearl Izumi's Elite Road IV Shoes feature lightweight uppers for an excellent fit and ventilated, supportive carbon soles with their Elite 1:1 Power Plates for outstanding power transfer. These sweet shoes also boast an ultra low stack height and arch supports for efficiency and comfort. You'll also love the bidirectional Boa closures and Velcro straps, which provide the ultimate fit.

When we set out to design the Women's Torch 3.0 Road shoes, we made our goal to create a performance road shoe that's as feature-packed as many top-end options, while coming in at a more palatable price. In order to achieve this, we utilize three strategically placed materials on the uppers, that are welded together—TPU and mesh in the front, with synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe, while a stiff rear and heel cup lock down your heel and keep all of your watts going into the pedals. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Women's Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon/composite fiber sole and torsion box construction are directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa® Lifetime Guarantee. - Upper made of mesh, TPU, and synthetic layer are placed in specific zones for comfort and lock-down, and are thermobonded for superior fit. - Standard Fit for on-bike support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 226g (1/2 pair, Size 39)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

In the heat of competition, you want a shoe that maximizes comfort and efficiency during the bike leg, while also helping you get in and out of transition as fast as possible. The new Trivent SC addresses all those needs, with performance-enhancing, tri-specific features, plus Body Geometry ergonomics for true comfort and great fit. Its stiff Body Geometry sole and footbed delivers superb efficiency and power transfer, while the looped heel with pull tab and wide entry/exit closure minimizes time in the transition area. Our pro triathletes demanded ultimate ventilation and faster transitions—you get to reap the rewards. Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT Powerline™ carbon/composite sole for light, stiff power transfer: Stiffness Index 10.0. - Thermobonded construction for a smooth internal lining for "sockless" fit and comfort. - Large, looped heel pull keeps tab accessible for easy shoe changes in transitions. - Debossed fold lines allow for easy shoe flattening for flying starts. - Supple upper with open-air mesh for maximum ventilation. - Three-bolt cleat pattern fits all major road pedals. - Wide closure system allows for easy entry/exit and disperses forces through the shoe for a comfortable and secure fit. - Rubberized heel for increased traction during transitions. - Approximate weight: 242g (1/2 pair, size: 42)

Backpack or pannier? With the versatile and innovative Vario PS, you no longer have to ask yourself this question. Featuring our Quick-Lock attachment systems on one side and a padded carrying system with chest strap and ergonomic shoulder straps on the other, The Vario PS transforms from backpack to pannier faster than ever before. A so-called Flap with an integrated pocket covers the side that is not in use. And for any items that you need quick access to, there is a zippered outer pocket. Everything else can be accessed via the practical and proven roll closure, including your laptop for which a padded compartment is provided. This waterproof hybrid bag is PVC-free and sustainably manufactured in Germany. Further features: - Reflectors - Reflective yarn in the shoulder straps - Mesh outer pocket on the side

Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size

Designed specifically for cool and wet conditions, Ragnarök provides a high level of water resistance, moisture regulation, and comfort in a performance cycling shoe. Constructed with a BOA closure, waterproof membrane, and rubberized shell that extends above the ankle, Ragnarök delivers unrivaled weather protection in the wettest and muddiest of conditions. - Hook-and-loop neoprene ankle - BOA closure with IP1 low power reel - Works with 2-bolt mountain compatible cleats - Black finish - 25ºF+ / -3ºC+ Comfort

The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a standalone tire pressure gauge. The optional burst tank installs or removes in seconds, and can be used either separately or integrated for installing and inflating tubeless tires with ease. - Burst tank can be pressurized to install and inflate tubeless tires - Tank is removable for easy transport - Hidden hose stores neatly in the body of the pump

A versatile performance road cycling shoe that's quick and easy to fit. With asymmetrical Overcurve upper, moderately stiff R4 sole and single Boa closure, it's designed to suit a wide range of riders. Tempo Overcurve R4 is a versatile performance road cycling shoe that's quick and easy to fit. It's designed to suit a wide range of riders and many types of ride. This shoe has been created to deliver an essential timeless look: classic considerations of a road shoe have been redefined with a distinct fizik identity and smart form-fitting construction. The iridescent options add a new twist to that style. The Overcurve shoe construction features a staggered collar that wraps around the ankle, tracing the natural misalignment of the ankle's two bony protrusions: the lateral and medial malleoli. The result is an asymmetrical shape, with the throat of the shoe curving over the foot from its outside to its inner side. The closure is fast and secure, with a single micro-adjustable Boa IP1-B dial. The new, moderately stiff, R4 outsole – with 15% infused carbon fiber – strikes a balance between comfort and pedaling efficiency to make it a true all-rounder. It also provides efficient ventilation and internal channeling for temperature management and features cleat positioning well suited to aggressive, aero positions. - Outsole: R4 outsole – carbon injected nylon, stiffness index 7 - Overcurve: asymmetrical construction that ergonomically conforms to the foot's anatomy - PU-laminated mesh upper: enhanced ventilation with support where needed - Weight: 230g (size 42 - 1/2 pair)

The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush, the lightest and most ventilated extended coverage helmet available. We've teamed up with MIPS researchers to introduce MIPS SL—a new, ultra-light, and supremely comfortable version of MIPS that's available exclusively on Specialized helmets. With MIPS SL, we've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist "watchband" attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. Starting with protection, the Ambush boasts a significant amount of extended coverage, Energy Optimized Multi-Density EPS foam that manages the energy from impacts effectively, and a Aramid-Reinforced Skeleton that provides extra structure for the foam. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. With its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly tinkering. The Ambush also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - New MIPS SL is the lightest, most ventilated MIPS protection to date and is exclusively available on Specialized helmets. - Patented aramid-reinforced skeleton provides internal EPS support. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Mindset 360 fit system provides a secure, customizable fit with 360-degree tension adjustment, five height positions, and an integrated dial for easy, on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling System with massive vents, internal Cross-Channels, and aligned exhaust ports increases airflow to keep you cool. - Low profile in-molded shell with smooth, snag-free exterior shape. - Extended coverage for added protection and durability. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location. - Lightweight, quick-drying liner features a Gutter Action Brow that channels moisture away from eyes. - Tri-Fix web splitter for improved comfort and ease of strap adjustments.

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

Service tools to ensure long-term success of Chris King hubs. - For intensive servicing of Ringdrive system found in most Chris King rear hubs - Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual - Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Has been updated to work with 12-speed cassette sprockets - The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change - Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings - 500mm cable length to Ergopower controls - 550mm cable length to EPS V4 power unit

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

A perfect cycling shoe for riders with wide feet, with a polyurethane-laminated mesh upper, Boa IP1-B dial closure, R4 outsole and higher-volume fit. All-round road cycling shoe is designed to be equally at home on weekend group rides, in daily training, and stretching out on a granfondo. - PU laminate over mesh upper - BOA IP1-B dial closure - R4 outsole – carbon injected nylon, stiffness index 7 - Weight: 232 g (size 42- ½ pair) - Sizes: 37-48 (37-47 also in half sizes) - Tempo: versatility road series designed for the most enjoyable riding experience - Intended use: Road cycling - designed and engineered to perform on paved roads, from the smoothest tarmac to the most demanding pavé

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz for Moto is the first-of-its-kind tire pressure sensor for Zipp 3Zero Moto wheels and takes the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. Features - Data reported with +/- 2% accuracy at .1 PSI resolution. - Only compatible with Zipp 3ZERO Moto wheels. - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours. - IPX7 dustproof/waterproof rating.

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

Ragnarök BOA® boots are perfect for the hard-to-predict weather of late fall and early spring. Built to block cold and moisture, these lightweight cycling boots feature a 25ºF+ (-4ºC+) comfort range to keep feet warm and dry through the chill of late autumn and early spring rides. - Free cleat plates for flat-pedal use are available upon request. Please contact brand support at info@45nrth.com - Rated for 25ºF+ (-4ºC+) comfort - Waterproof breathable membrane to manage moisture - Neoprene ankle cuff to keep out moisture and road grit - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Real-rubber outsole with added grip for slippery surfaces - 2-bolt cleat mount ANTI-SLIP MICROGLASS RUBBER A rubber compound electrostatically aligned with microscopic glass fibers to create abrasive protruding shards, increasing friction on slippery surfaces such as ice, wet wood, wet linoleum, and wet metal found on many stairs and floors. WATERPROOF-BREATHABLE MEMBRANE An ultra-thin sheet of microporous material behind our textile shells keeps you dry and warm in the harshest weather conditions. Our waterproof, breathable membranes stop liquid from the outside, but release vapor from the inside for thermal and moisture regulation. BOA CLOSURE Micro-adjustable BOA closure for perfectly dialed fit. LOW CUT NEOPRENE ANKLE Secure closure provides warmth and protection from the elements.

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate - Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)

The MET Roam MIPS is designed for all-mountain and enduro riding. The back of the head and the temples are especially in need of protection from impact, so we’ve increased the coverage around these key areas, without sacrificing the helmet’s light weight. The injection-molded visor is flexible to adapt to the shell of the helmet in a crash. This unique feature helps to manage extra rotational forces transferred to your neck. There are clips on the visor and a rear edge, which keep goggle straps in place during the ride, achieving ultimate compatibility with your eyewear. Featuring the MIPS-C2 rotational management system, the Roam is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The MIPS-C2 solution separates the shell and the liner with a thin plastic Low Friction Layer (LFL). The Roam Mips features 22 vents that work together with the purpose-built internal channel to provide optimal airflow at high and low speed. The MET Roam has also been rewarded for its comfortable fit. The inner padding has an extended surface area which provides the perfect stability without disturbing internal airflow. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - Exceptionally comfortable and secure on the head thanks to a refined internal shape and stabilizing inner padding - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Orbital Fit System - The 360° head belt with vertical and occipital adjustments help to maximize adjustability - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Integrated goggle strap clips and sunglass ports to securely dock eyewear when climbing or resting - 22 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 62cm

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve

Chamois Butt'r starter pack Variety pack: - 2x Coconut: Non-greasy skin lubricant made with Organic Coconut Oil and Shea Butter - 6x Original: Non-greasy skin lubricant that easily washes off skin and clothing with soap and water - 2x Her: Made with aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil - 2x Eurostyle: Non-greasy skin lubricant with a traditional European cooling formula

Big cities call for big protection, and Kryptonite's New York Chain delivers with 12mm six-sided chain links made from hardened manganese steel. Wrap this burly lock around your frame worry-free thanks to the durable nylon cover that protects your bike's paint from scratches. Leave with peace of mind knowing the 14mm hardened Max-Performance steel shackle mated to the Evolution Series 4 Disc Lock is on duty. With a double deadbolt design to protect against twist attacks, would-be thieves with an eye on your bike don't stand a chance. It includes three stainless steel keys--one of which is lighted for night access!

The child bike seat for maximum child comfort, with custom fit and convenient magnetic buckle Thule Yepp Nexxt child bike seats let you and your child enjoy everyday bike rides together – safely, easily, and in style. The lightweight and safe frame or rear-rack-mounted child bike seat has a contemporary design providing premium comfort for your child, with added safety features for head protection. The magnetic safety buckle quickly and easily secures your child to the seat. Thule Yepp Nexxt Mini is a lightweight and stylish front-mounted baby bike seat with a smart design for rides around town. Thule Yepp Nexxt Mini is easy to mount and dismount in seconds on both normal and most ahead handlebar stems with a smart quick-release bracket. Features: - A lightweight yet sturdy seat combining a hard outer shell with soft padding for premium child comfort - Magnetic childproof safety buckle secures your child quickly and conveniently - Available in frame, rack, and front versions - The seat can be mounted and dismounted from the bike in seconds with the universal quick-release bracket, making it easy to switch between different bikes - Adjustable footrests and foot straps ensure a perfect fit as your child grows - A soft and shock-absorbing seat that lets your child travel in comfort - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Comfortable handlebar for your child’s hands during the ride - Water-repellent materials make the seat easy to clean and keep dry - Designed and tested for children from 9 months* to 3 years old, up to 33 lbs/15 kg.(*Consult a pediatrician for children under 1 year old.)

SHRED is the high-end performance daypack with an outstanding comfort fit that you bring to your favorite freeride MTB adventures. The pack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me harness system and waist support belt that makes it a super smooth biking backpack that will stay put without cramping your style, even when going downhill or on crazy terrain. - Zero bounce with No Dancing Monkey 2.0 + Snug Me-Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - 25L storage to fit all your gear and tools. - NDM Buckle-Technical buckle for a more secure closure and a better fit ZERO BOUNCE ON THE FREERIDE MOUNTAINBIKE TRAILS With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the No Dancing Monkey™ 2.0 + Snug Me harness you’re going to get the best fitting bike backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system and armor attachment points, makes this MTB backpack perfect for your trail or enduro MTB adventure. PACK YOUR GEAR The SHRED 25 has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles. We even threw in a microfiber cleaner tissue… we thought of everything! Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps. You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style, important on a mountain bike backpack.

Achieve security and one-key convenience with the ABUS Bordo 6405 Folding lock/Bosch battery lock cylinder combo. - 5.5mm bars with extra-soft two-component casing to prevent damage to paintwork - ABUS Link Protection Shield for a high level of protection against hinge sawing - Ideal for securing high-value bicycles - ABUS Plus lock cylinder is keyed alike to the Bosch battery lock

Looking for the security of a U-Lock but the flexibility of a chain? Look no further than the Bordo Granit X-Plus 6500. With an ABUS security rating of 15 out of 15, this lock features temper hardened steel bars encased in an extra soft coating to protect your bike's paint job. The ABUS Link Protection Shield offers high protection from sawing of the links. The lock body, links and supporting elements of the locking system use the same high quality steel you'll find in the bars. The patented X-Plus Key cylinder offers extremely high protection from picking and it can be keyed alike with other ABUS locks featuring the same X-Plus cylinder - very convenient for multi-lock and multi-bike households. Like all locks in the Bordo family, the 6500 is simple to carry. The rattle free lock carrying case attaches easily to the frame via the silicone coated non-slip Velcro straps or screws easily into the bottle-cage mounts. - 5.5mm steel bars - Bars, links, and lock body are made of special hardened steel - Soft-touch coating on the bars and matching silicone lock body cover protects bike's paint job - ABUS X-Plus Cylinder offers extremely high protection against picking - Two keys supplied with the lock, one LED lighted - ABUS Code Card for ordering additional or replacement keys - Compact, versatile folding technology offers greater range of locking options - Length: 110cm

1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex

No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

The Sidi Prima is designed for the modern rider. The Prima is easy to wear and adjust, thanks to its Firmor Closure and lightweight upper built to reduce foot fatigue. Its low-profile carbon nylon Aerolite Sole is engineered for efficient power transfer for sprinting, with enough flex and comfort for long rides. -The Single Tecno-3 System creates a perfect balance between the shoe's internal and external side, providing an excellent fit while adapting to every instep -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -The newly designed integrated heel cup is light weight and reinforced to avoid deformations after prolonged strenuous use -Aerolite sole is designed to maximize aerodynamics and power transmission on the bike -The nylon and carbon fiber composite material of the Aerolite Sole provides the perfect balance of stiffness and flex for effortless and comfortable pedaling -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Our patented Secure-Lock ratchet-action closure and push-button release clamp head, found on the award-winning Pro-Elite Repair Stand, became so popular we decided to make it compatible with steel bike shop repair stands. The versatile and patented 3.25? (8.3cm) wide clamp is capable of managing any bike frame, up to 2.6? (6.6cm). When you see the Pro-Elite Commercial Clamp upgrade in your bike shop, you know you’re in the presence of experts. NOTE: This is NOT a suitable upgrade for our folding tripod repair stands. Please contact Feedback directly to order the Pro Elite folding clamp head assembly.

The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.

Transfer maximum power to the pedals. The Kestral Pro Boa combines our stiffest sole and clipless compatibility for an efficient all-mountain ride. The Boa Fit system means you can dial in a secure fit, while the wide Stealth C4 rubber sole provides confident footing in all terrain. Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort. - Boa Closure System for micro-adjustment, and secure and consistent hold - Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort - Stealth C4 rubber sole provides confident footing in all terrain - Durable, lightweight EVA midsole - Enjoy the comfort and performance of OrthoLite sockliner - Regular fit, clipless style

Designed to withstand the elements and provide comfort on rugged trails, the Trailcross GTX Flat Shoe blends a durable, hiking-inspired build with a high friction Stealth Phantom rubber outsole. - Bike and Hike outsole: designed for grip at the toe and heel while maintaining a pedal platform under foot - Weather-friendly GTX (Gore-Tex) mesh upper for breathability and comfort - Textile-free and closed cell sockliner - Lace tuck on the middle of the tongue - Neoprene cuff keeps debris out - Non-marking Phantom Dotty outsole for grip on and off the bike - Midsole flex points allow flex while hiking but keep stiffness while on the pedal

- With your child riding shotgun, you’ll help foster a love of the outdoors and a passion for riding. The only problem you’ll have is getting them off it. - Designed for children 2 – 5 years (up to 22kg or 48lb) - Full rubber protection (for your alloy or carbon frame) - The shotgun seat has adjustable width, adjustable angle, and has a fully adjustable saddle. It fits top tubes from 30 – 68mm wide, and down tubes from 30 – 100mm wide. - Adjustable width to fit any frame size or shape - Adjustable angle to fit flat or sloping top tubes - Quick-release for easy fitting and removal.

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

Joker Combination Wrench Set

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

Rear-mounted child bike seat provides comfort and style for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and foot straps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - Universal rack mount system for quick and easy mounting of the child bike seat on your bike - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and keep dry - High-quality metal lock that secures the child bike seat to your bike included - Designed and tested for children from 9 months* to 6 years old, up to 48.5 lbs/22 kg.* Consult a pediatrician for children under 1 year old.

FLOW is our high-end Performance mountain bike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 25 MTB backpack has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.

Bike security gets smart. The use of innovative technology, combined with maximum mechanical security, makes the 770A SmartX the most secure bike lock in its class. Enjoy the benefits of the innovative SmartX cylinder and make your iOS or Android smartphone your individualized key. Combined with the proven 100dB alarm, this lock offers maximum security for high-quality E-bikes and load-carrying bicycles. - 13mm hardened square shaft parabolic shackle - SmartX locking system with Bluetooth—high-quality, keyless locking offers user-friendly operation - Alarm function with at least 100 dB for 15 seconds followed by automatic reactivation - 3D Position Detection—detects vibrations and the smallest movement in all three dimensions and triggers the alarm - Smart alarm—the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby - USB-C port - App connection - Location storage of the bike's last parking location - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, the housing and the locking mechanism's load-bearing parts are manufactured from specially hardened steel

- Physical security of the Bordo GRANIT XPlus 6500 now with an alarm. - 90cm length - Sensitive vibration alarm thanks to 3D Position Detection - Short warning tone in case of small or short movement - Alarm of at least 100 dB for 15 seconds - Automatic activation - Acoustic signals inform about battery and activity status - Inactive transport position - Easy battery replacement without tools (type CR2) - Good protection with high security

A waterproof, bikepacking-inspired / urban-inspired seat pack bag that is quickly attached/removed via an ingenious quick-release seatpost mounting system. Ideal for the commuting trunk bag user who doesn’t want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Universal Rixen & Kaul CONTOUR MAX seatpost bracket with 2 sets of seatpost clamps. (25-32mm & 32-36mm) – 3kg load rating (not including bag weight). - 8mm Engineered aluminum frame provides stiffness and load stability. - *Not advised for carbon fibre or ultra-lightweight seatposts. - Intuitive waterproof roll-down closure system provides flexible load management. - Front external mesh pocket with Velcro closure. - Outer bungee system with wings, allows excess gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Ultra-visible three-way 3M triangle logos. - Polypropylene side stiffeners and dimensional foam top/bottom stiffeners provide additional load stability. - Supplemental rear closure strap system provides additional support. - Built-in U-lock holder. - Rear light clip. - Volume 12L / 732 cu/in - Weight 795g / 1.75 lbs (incl. bracket), 725g / 1.6 lbs (without bracket) - Dimensions 44x18x16-inches / 17.3-inches x7.1-inches x6.3-inches

- Lightweight polymer shell - Removable chin bar with easy fit system - 360° Turbine Brain injury reduction technology reduces forces associated with concussion - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for superior energy absorption - Maximized ventilation with 23 vents effective even at low speeds - Dri-Lex moisture wicking, breathable, anti-odor and washable inner liner - Hydration ready (with optional hands-free kit) - Fidlock magnetic closure system - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203 - 360° Turbine Technology: - Weight: From 750g (1.65 lbs) | Without chin bar: from 375g (0.83 lbs)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Push your limits in the great outdoors. These women's Five Ten biking shoes feature the BOA® Fit System for a custom fit. Seamless overlays offer abrasion resistance through rough terrain. The clipless shank is compatible with all mountain bikes. Made with a series of recycled materials, this upper features at least 50% recycled content. - Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps - Synthetic upper with seamless overlays - Non-slip heel cup - Clipless shank - Impact-resistant toe box

These men's Five Ten clipless bike shoes are built for intense pedaling. The BOA® Fit System offers on-the-fly adjustments. A Stealth Marathon rubber outsole balances grip and durability. The impact-resistant toe box adds protection. Made with a series of recycled materials, this upper features at least 50% recycled content. - Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps - Synthetic upper with seamless overlays - Non-slip heel cup - Clipless shank - Impact-resistant toe box

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside