Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Fenders

$34.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)
$21.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$55.99
Keep both your bike and yourself clean and dry with Sunlite's Cruiser Full Fender Set. These fenders offer full coverage and a cool look for your cruiser bike. The stays and fenders are steel so they're durable.
$60.00 - $80.00
The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware. - Engineered fender set with extended, research-based length for superior water protection. - Lightweight, yet highly durable multi-material design. - Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y - Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting. - Heat-treated, lightweight aluminum fender stays with stainless steel hardware.
$60.00
Fear the rain no more, have fun and stay dry with Specialized's Plug and Play Fender Set!
$50.00
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm
$60.00
Keep the road grime off your clothes, and arrive in style, with a durable fender set made specifically for the Turbo Como. It's all dry roads from here. - Durable fender set that's specifically designed to fit the Turbo Como. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and specific alloy hardware ensure the perfect fit for your Turbo Como. - Front fender supports Plug + Play mounting. - Front Length: 790mm - Rear Length: 1180mm
$59.99
Designed specifically for commuters, this 45mm wide front and rear fender set is the perfect option for the every day rider. The reflective strips that run down either side of the fenders provides enhanced visibility. - Sturdy stainless steel double stays - Easily mounted with included hardware
$40.99 - $59.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
$45.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
$10.49
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$54.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 20-28
$59.99 - $74.99
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.
$64.99 - $79.99
Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm
$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm
$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
$15.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$54.99 - $74.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$49.99
Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus the hardware is pre-installed for quick mounting.
$19.99
Turn your 'bent into an all-weather vehicle with Planet Bike's Hardcore Fender! Made of unbreakable Superflex polycarbonate with stainless-steel stays, it's ultra-tough. The adjustable stay positioning provides a secure fit on any style recumbent. The mudflap provides the ultimate in splash and spray resistance. Plus, the hardware is pre-installed for hassle-free mounting.
$29.99
Turn your 'bent into an all-weather vehicle with Planet Bike's Hardcore Fender! Made of unbreakable Superflex polycarbonate with stainless-steel stays, it's ultra tough. The adjustable stay positioning provides a secure fit on any style recumbent. The mudflap provides the ultimate in splash and spray resistance. Plus, the hardware is pre-installed for hassle-free mounting.
$2.18 - $4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$39.99 - $49.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$49.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$54.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
$18.00
The Dave's Mud Shovel fender by Portland Design Works is designed specifically for fat bikes. It's extra-long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure, keeping your backside dry. • 6.5-inches wide • 19.5-inches long
$18.00 - $19.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$25.00 - $29.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$9.99 - $13.99
- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications
Page 1 of 5 Next page